Gel Coat Catalyst Hardner (MEKP)

Bottle of gel coat catalyst hardener (MEKP) for polyester and vinyl ester resin systems, with a white cap and blue background.
Small white bottle of MEKP gel coat catalyst hardener with label, used for polyester and vinyl ester resin systems.
Small white bottle of Gel Coat Catalyst Hardener (MEKP) with a white cap, labeled with part number and chemical details, against a blue background.
SKU: F255000EB

Gel Coat Catalyst Hardner (MEKP)

$8.00

Gel Coat Hardener. Catalyst (MEKP) is a small bottle of methyl ethyl ketone peroxide (MEKP), a chemical hardener essential for curing polyester and vinyl ester resins, including gel coats.

*See description below*

Size:

Size

Estimated Ship Date: Oct 1

Questions? Ask a specialist: (909) 487-1574 or Chat now

The Catalyst (MEKP) is a small bottle of methyl ethyl ketone peroxide (MEKP), a chemical hardener essential for curing polyester and vinyl ester resins, including gel coats. When added to these resins, MEKP initiates a chemical reaction that transforms the liquid resin into a solid state, making it a critical component in fiberglass work, boat repairs, and mold making. 

MEKP is a hazardous material. It is flammable, corrosive, and can cause severe burns or eye damage upon contact. Always wear appropriate personal protective equipment (PPE) such as gloves, goggles, and work in a well-ventilated area. Due to its hazardous nature, MEKP is often restricted to ground shipping only.

If you're new to working with fiberglass or resins, it's crucial to follow the resin manufacturer’s instructions for the correct MEKP ratio and curing times. Too much catalyst can cause the resin to cure too quickly, generating excessive heat, while too little may result in incomplete curing.

  1. Prepare Your Work Area

    • Make sure you're in a well-ventilated space.

    • Wear protective gloves, goggles, and a respirator—MEKP is hazardous.

    • Make sure your tools (spray gun, mixing container) are clean and ready.

  2. Measure and Mix

    • Pour the gel coat into a clean mixing cup.

    • Add 1–2% MEKP by volume (e.g., about 10–20 drops per ounce of gel coat, or ~10 cc per quart, depending on temperature).

      • Use 1% in warm weather (fast cure).

      • Use 2% in cooler temperatures (slower cure).

    • Stir thoroughly but gently for at least 60 seconds to ensure an even mix.

      • Avoid whipping air into the mixture, which causes bubbles.

  3. Application

    • Apply the catalyzed gel coat immediately—you have a working time of about 15–20 minutes, depending on temperature.

    • Use a cup gun or spray gun for even application.

    • You can also brush it if doing small repairs.

  4. Curing

    • Allow the gel coat to cure fully. It should firm up in 1–2 hours.

    • Don’t touch or rework the surface until it's fully hardened.

  5. Cleanup

    • Clean all tools with acetone before the gel coat hardens.

❌ Do NOT:

  • Do not spray MEKP separately or after the gel coat—it must be mixed in beforehand.

  • Do not over-catalyze (more than 2.5%)—it can cause cracking or excessive heat.



Malibu Parts Guarantee

Got Rewards?

EARN POINTS ON EVERY DOLLAR

JOIN TODAY